Settings on the Fibre Channel Card (8Gbps FC Card)
2.2.3 Starting the HBA Setup Utility
Press [Alt]+ [E] or [Ctrl]+ [E] key during the following massage appears.
1.
FIGURE 2.54 Stating Legacy BIOS Setup
Start LightPluse BIOS Utility.
2.
FC ports of Fibre Channel Card appear in HBA Listing screen. Select a FC port to set up and press [Enter] key.
FIGURE 2.55 Emulex LighrPlus BIOS Utility(1)
3. Menu for the FC port selected in the previous screen appears. Memory Address (Mem Base), Firmware Version, WWPN
(Port Name), WWNN (Node Name), and Topology for the FC port also appear.
C122-E206-04EN
45