Advertisement
4
Tools Required
Tools Required
You'll need the following items to install the PMC graphics card:
• Small flat-tipped screwdriver.
• Static-free work area.
Prerequisites
1 There is a minimum firmware revision level for the Model 744 board
computers: a firmware upgrade is needed if the Boot ROM revision is pri-
or to revision 4.0. To determine the revision level of the Boot ROM on
your Model 744, type the command IN FV at the Boot Console Handler
(BCH) Main Menu prompt (more details are available in your Model 744
Owner's Guide).You may obtain a firmware upgrade and instructions
from your local Country Response Center (in North America you may call
800-633-3600) or through the WWW at:
http://us-support.external.hp.com .
2 Your system must be running Workstation ACE (1998 06) for HP-UX
10.20 or later.
3 If you are connecting a monitor that does not have an EVC-style connec-
tor, you will need HP's A4168A adapter cable.
4 If you need to compute power usage for the PMC graphics card, the PMC
graphics cards draw through the bridge adapter:
•
+5 Vdc - 2.33 A (typical)
•
+12 Vdc - 2.0 mA (typical)
Advertisement
