Advertisement
NOTE:
14
Procedure
16 Use the following command at the Main Menu prompt to configure the
monitor for your PMC graphics card:
co mo pmc n tt
where n is the PMC card site number, and tt is the monitor type number.
17 You can use the following command to get a full list of the valid monitor
types:
co mo list
18 If you have onboard graphics and have installed four PMC graphics cards,
you must disable the Model 744 onboard graphics with the command:
co mo disable builtin
If you disable the onboard graphics, and later need to use the onboard
graphics as the console device, use the procedure in your system's Owner's
Guide for the "Using the Emergency Interactive Console Search" feature.
After configuring the monitor, continue the boot process by using the fol-
19
lowing command at the Main Menu prompt:
boot
20 If you choose to use the online Support Tools Manager (xstm) to verify operation
of more than two PMC graphics cards in your system, you need to change two
parameters within the System Administration Manager (SAM):
a Within SAM, select Kernel Configuration
b Then select Configurable Parameters
c
Change the following two parameters:
semmni = 128
semmns = 256
d When exiting SAM, create a New Kernel with the new configuration.
e
Choose to move the Kernel into place and allow SAM to shutdown/reboot the
system.
Advertisement
