Siemens SINUMERIK 840D sl Series Diagnostics Manual page 587
Hide thumbs
Also See for SINUMERIK 840D sl Series:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
08/2005
Program Con-
Internal
tinuation:
111007
Error in line %1 %2
Parameters:
%1 = Line number
%2 = Error description
Definitions:
--
Reactions:
- NC Start disable in this channel.
- Alarm display.
Remedy:
Eliminate the corresponding error.
Program Con-
Internal
tinuation:
111008
Spindle not synchronized
Definitions:
Spindle not synchronized.
Reactions:
- Alarm display.
Remedy:
Let the spindle run at least one revolution (M3, M4).
Program Con-
Internal
tinuation:
111009
Load new tool: T%1
Parameters:
%1 = Tool number
Definitions:
Tool change program requests a new tool.
Reactions:
- Alarm display.
- NC Stop on alarm.
Remedy:
Load new tool.
Program Con-
Internal
tinuation:
111010
Teach-in interruption: Log overflow
Definitions:
The Teach-in procedure was interrupted. Teach-in file is closed.
Reactions:
- Alarm display.
Remedy:
In the machine data 9606: $MM_CTM_SIMULATION_TIME_NEW_POS the value of the
update rate is to be increased by 100 to 200 ms.
Program Con-
Internal
tinuation:
111100
Wrong position programmed for the spindle
Definitions:
A position beyond the range of 0 -359.999 has been programmed for a modulo axis.
Reactions:
- Interpreter stop
- NC Start disable in this channel.
- Interface signals are set.
- Alarm display.
Remedy:
Program a position in the 0 - 359.999 range.
Program Con-
Clear alarm with the RESET key. Restart part program
tinuation:
111105
No measuring system available
Definitions:
SPCON, SPOS or SPOSA has been programmed.
These functions require at least one measuring system. According to MD: NUM_ENCS
the machine axis/spindle has no measuring system.
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
Overview of Alarms
2-587
Hide quick links:
Advertisement
Chapters
Table of Contents
