Siemens SINUMERIK 840D sl Series Diagnostics Manual page 456
Hide thumbs
Also See for SINUMERIK 840D sl Series:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Overview of Alarms
Remedy:
--
Program Con-
Clear alarm with the RESET key. Restart part program
tinuation:
61198
Channel %1 block %2: no swiveling in JOG --> several active basic frames(G500)
contain rotations
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
Alarm triggered by following cycles: CYCLE800.
Reactions:
- Interpreter stop
- NC Start disable in this channel.
- Interface signals are set.
- Alarm display.
Remedy:
--
Program Con-
Clear alarm with the RESET key. Restart part program
tinuation:
61199
Channel %1 block %2: approach of tool and swivel data record change (TOOLCAR-
RIER) not allowed
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
Alarm triggered by following cycles: CYCLE800.
Reactions:
- Interpreter stop
- NC Start disable in this channel.
- Interface signals are set.
- Alarm display.
Remedy:
--
Program Con-
Clear alarm with the RESET key. Restart part program
tinuation:
61200
Channel %1 block %2: Too many elements in machining block
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
The machining block contains too many elements.
Alarm triggered by following cycles: CYCLE76, CYCLE77, E_CALL, E_DR, E_DR_BGF,
E_DR_BOR, E_DR_O1, E_DR_PEC, E_DR_REA, E_DR_SIN, E_DR_TAP, E_MI_TR,
E_PI_CIR, E_PI_REC, E_PO_CIR, E_PO_REC, E_PS_CIR, E_PS_FRA, E_PS_HIN,
E_PS_MRX, E_PS_POL, E_PS_ROW, E_PS_SEQ, E_PS_XYA, E_SL_LON, F_DR,
F_DR_PEC, F_DR_REA, F_DR_SIN, F_DR_TAP, F_MI_TR, F_PI_CIR, F_PI_REC,
F_PO_CIR, F_PO_REC, F_PS_CIR, F_PS_MRX, F_PS_ROW, F_PS_SEQ, F_SL_LON
Remedy:
Check the machining block, delete some elements, if required.
61201
Channel %1 block %2: Wrong sequence in machining block
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
The sequence of elements in the machining block is invalid. Alarm triggered by following
cycles: E_CP_CE, E_CP_DR, E_MANAGE, F_CP_CE, F_CP_DR, F_MANAGE.
Reactions:
- Interpreter stop
- NC Start disable in this channel.
2-456
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
© Siemens AG, 2005. All rights reserved
08/2005
Hide quick links:
Advertisement
Chapters
Table of Contents
