Table of Contents
Advertisement
5
ACCELERATOR AND BRAKE PEDAL GROUP
22
21
25
TYPICAL
2 PLACES
26
25
28
27
BRAKE PEDAL INSTALLATION
1. From the top side of the floorboard, insert the brake pedal assembly through the opening in the floor, and
install the brake pedal stop bumper (11) on the brake pedal assembly (Figure 5-1, Page 5-2). Do not
tighten the jam nut (12) at this time.
2. Secure the equalizer rod (13) to the brake pedal assembly (8) with the clevis pin (14) and bow-tie pin (15)
as shown.
3. Position and attach brake pedal assembly, mounting blocks (23) and washers (2) to vehicle frame as
shown. Tighten the bolts and nuts to 113 in-lb (12.8 N·m).
Page 5-2
2005-2006 HUV4210-G, 4210-E, 4210-GXP, 4210-EXP Maintenance and Service Manual
10
8
TYPICAL
4 PLACES
16
24
Figure 5-1 Brake and Park Brake Pedal Assembly
13
5
15
14
Service part brake
pedal has second
weldment.
1
Brake Pedal and Park Brake
29
5
7
3
6
Advertisement
Table of Contents
