4
Parts Replacement and Cleaning Procedure > Motors > Removing the Tray 2 Shift Motor (M106)
Removing the Tray 2 Shift Motor (M106)
1) Remove the 7 screws and remove the tray 2 upper cover.
x4
3) Remove the connector, 2 screws and then the tray 2 shift motor.
4
Parts Replacement and Cleaning Procedure > Motors > Removing the Tray 2 Shift Motor (M106)
x3
F-4-151
Caution:
The tray will fall with its own
weight after removing the motor.
Hold the tray with a hand before
releasing the motor from the drive
belt.
F-4-154
2) Remove the 2 screws and remove the tray motor cover.
F-4-152
4-64
F-4-153
4-64