Mounting / Installation
5
Assembly
5 Mounting / Installation
5.1 Assembly
22 | 32
The line separator may be fitted in any position. Ensure that the line separator LED
is visible after mounting.
You can fit the FDCL221 line separator in various ways:
●
Directly on a U-rail TS35
●
With a cable tie on the mounting hole
●
With a screw on the mounting hole
Mounting on a U-rail TS35
Figure 7: Installing the line separator on a U-rail
1 Pair of terminal blocks
Mount the line separator to the U-rail.
l
–
Slide the line separator onto the U-rail or
–
Press the line separator onto the U-rail. You must be able to hear the line
separator click into place.
If you are mounting several line separators onto the same U-rail, we would
recommend using a pair of terminal blocks (at least 3 sets) after each line
separator. This results in a clear and space-saving form of mounting.
The terminal blocks must be ordered by the party responsible for installation.
For disassembly, simply slide the line separator off the U-rail or bend open the
locking catch on the line separator and remove the device from the U-rail.
The terminal block may feature the following forms of connection:
●
Flat 2.8 x 0.8 mm plug-type connection (preferred choice)
●
Screw terminals or socket strip
●
Soldered connections
1
007063_h_en_--