Advertisement
Page
Ver.
Item
Gamma
Gamma,
R/G/B/M
Coarse
Gamma
BlkGam
R/G/B/M
BlkGam
Test
Clear
W.Clip/Knee
W. Clip
R/G/B/M
W. Clip.
On/Off
Point
R/G/B/M
Slope
R/G/B/M
Knee
A. Knee
mode
KneSat.
(Point)
Kne Sat
Knee MAX
Test
Clear
BKP-5090
Settings
Contents
_99 to 99 ([0])
Adjusts the R, G, B and master gamma level.
0.35, 0.40, [0.45],
Selects the gamma value in steps.
0.50, 0.55
[On], Off
Turns the gamma value on and off.
_99 to 99 ([0])
Adjusts the R,G,B and master black gamma to adjust the rising block of
the gamma correction curve
On, [Off]
Turns the black gamma function on and off.
1, 2, [Off]
Selects the test signal.
1
: Outputs the sawtooth waveform test signal
2
: Outputs 3-step waveform test signal
Off
: No test signal is output
Press MENU SEL
Resets all settings on the Gamma page to the factry settings.
switch to execute.
(When you press MENU SEL switch, the "Clear" indication flashes.
Press MENU SEL switch again to execute; press CANCEL button to
cancel.)
_99 to 99 ([0])
Adjusts the R,G,B and master white clip levels
[On], Off
Turns the white clip function on and off
_99 to 99 ([0])
Adjusts the R, G, B and master knee point levels when the auto knee
function is Off
_99 to 99 ([0])
Adjusts the R, G, B and master knee slope levels when the auto knee
function is Off
[On], Off
Turn the knee function on and off
On, [Off]
Turns the auto knee function on and off
[nor], adp
Selects the auto knee mode
nor:
Normal mode
Automatically adjusts the knee point and knee slope to obtain
the optimum peak level for the highlight content of a picture
adp: Adaptive mode
Detects an object which is occupying the largest area of a picture
and automatically adjusts the knee point and knee slope to obtain
the optimum level for the object
_99 to 99 ([0])
Sets the video level point where the knee saturation function starts to
be activated
[On], Off
Turns the knee saturation function on and off
On, [Off]
Turns on and off the knee max function which changes the slope to
completely collapsed form
1, 2, [Off]
Selects the test signal.
1
: Outputs the sawtooth waveform test signal
2
: Outputs 3-step waveform test signal
Off
: No test signal is output
Press MENU SEL
Sets all settings on the W.Clip/Knee page to 0.
switch to execute.
(When you press MENU SEL switch, the "Clear" indication flashes.
Press MENU SEL switch again to execute; press CANCEL button to
cancel.).
3-1. Setup Menu (BVP-550 series)
3-1-2. Paint Menu
3-9 (E)
Advertisement
