Motorola MVME2400 Series Installation And Use Manual page 35
Vme processor module
Hide thumbs
Also See for MVME2400 Series:
- Programmer's reference manual (331 pages) ,
- Installation and user manual (20 pages)
Table of Contents
Advertisement
1. Attach an ESD strap to your wrist. Attach the other end of the ESD
2. Perform an operating system shutdown. Turn the AC or DC power
Inserting or removing modules with power applied may result in damage
!
to module components.
Caution
Dangerous voltages, capable of causing death, are present in this
!
equipment. Use extreme caution when handling, testing, and adjusting.
Warning
3. Carefully remove the MVME2700 from its VMEbus card slot and
Avoid touching areas of integrated circuitry; static discharge can damage
!
these circuits.
Caution
4. Attach the four standoffs to the MVME240x module. For each
http://www.motorola.com/computer/literature
strap to the chassis as a ground. The ESD strap must be secured to
your wrist and to ground throughout the procedure.
off and remove the AC cord or DC power lines from the system.
Remove chassis or system cover(s) as necessary for access to the
VME modules.
lay it flat, with connectors P1 and P2 facing you.
standoff:
– Insert the threaded end into the standoff hole at each corner of
the VME processor module.
– Thread the locking nuts onto the standoff tips.
– Tighten the nuts with a box-end wrench or a pair of needle nose
pliers.
Hardware Installation
1-15
1
Hide quick links:
Advertisement
Table of Contents
