1Hardware Preparation and
Introduction
This chapter provides a brief description of the MVME2400 Series VME
Processor Module. It also provides instructions for preparing and installing
the hardware.Unless otherwise specified, the designation "MVME240x"
refers to all models of the MVME2400 series modules.
Description
The MVME240x is a PCI Mezzanine Card (PMC) carrier board. It is based
on the PowerPC
Two front panel cutouts provide access to PMC I/O. One double-width or
two single-width PMCs can be installed directly on the MVME240x.
Optionally, one or two PMCspan PCI expansion mezzanine modules can
be added to provide the capability of up to four additional PMC modules.
Two RJ-45 connectors on the front panel provide the interface to
10/100BaseT Ethernet, and to a debug serial port.
The following list is of equipment that is appropriate for use in an
MVME240x system:
™
750 microprocessor, MPC750.
PMCspan PCI expansion mezzanine module
Peripheral Component Interconnect (PCI) Mezzanine Cards
(PMC)s
VMEsystem enclosure
System console terminal
Disk drives (and/or other I/O) and controllers
Operating system (and/or application software)
Installation
1
1-1