Selection Of Working Plane (G17 To G19) - Siemens SINUMERIK 840DE Programming Manual

Hide thumbs Also See for SINUMERIK 840DE:

Table of Contents

Selection of working plane (G17 to G19)

By specification of working plane, in which the contour is to be machined also defines the

following functions:

• The plane for tool radius compensation.

• The infeed direction for tool length compensation depending on the tool type.

• The plane for circular interpolation.

Fundamentals

Programming Manual, 10.2004 Edition, 6FC5 298-7AB00-0BP1

3.7 Selection of working plane (G17 to G19)

Working plane X/Y

Infeed direction Z Plane selection 1st - 2nd geometry axis

Working plane Z/X

Infeed direction Y Plane selection 3rd - 1st geometry axis

Working plane Y/Z

Infeed direction X Plane selection 2nd - 3rd geometry axis

Positional Data

Show Quick Links

Table of Contents