Table of Contents
Advertisement
6. TROUBLESHOOTING
Table 6-2 lists event log entries unique to the equipment. No.1 through 12 and No.14 through
21 are collected in the system log, and Nos.13 is collected in the application log.
Table 6-2 Event Log Entries Unique to the Equipment (1/2)
No. Event ID
Source
1
259
HFBRAS_SYS
2
260
HFBRAS_SYS Information HFBRAS Remote shutdown request
3
263
HFBRAS_SYS Information HFBRAS Temperature returned to
4
265
HFBRAS_SYS
5
266
HFBRAS_SYS
6
267
HFBRAS_SYS Information HFBRAS Revolutions of cpu fan
7
268
HFBRAS_SYS
8
270
HFBRAS_SYS Information HFBRAS Used hours on the drive of
9
274
HFBRAS_SYS
10
275
HFBRAS_SYS Information HFBRAS Revolutions of case fan
11
524
HFBRAS_SYS Information HFBRAS In the current settings,
12
539
HFBRAS_SYS
13
769
HFBRAS_APP
Type
Category
Warning
HFBRAS The temperature exceeded
prescribed value.
occurred.
prescribed value.
Warning
HFBRAS Immediately back up your
data and replace drive.
A failure may be imminent
on the drive of the drive
bay%1 (%2).
Error
HFBRAS Revolutions of cpu fan
deteriorated remarkably.
returned to normal value.
Error
HFBRAS The computer was shut
down because temperature
became dangerous.
the drive bay%1 exceeded
prescribed value.
Error
HFBRAS Revolutions of case fan
deteriorated remarkably.
returned to normal value.
memory dump file won't
be saved.
Error
HFBRAS The "%1" was finished.
Error
HFBRAS An error occurred in %1.
errorcode = %2.
6-18
Description
Read the description of
abnormal temperature in "6.2.2
(1)" and take action
accordingly.
No handling.
No handling
We recommend you back up
the data and replace the drive.
Read the description of fan
failure in "6.2.2 (1)" and take
action accordingly.
No handling.
Read the description of
abnormal temperature in "6.2.2
(1)" and take action
accordingly.
We recommend you back up
the data and replace the drive.
Read the description of fan
failure in "6.2.2 (1)" and take
action accordingly.
No handling.
Change the setting according to
"7.3.2".
Hardware monitoring of the
RAS software has been
terminated. If restarting the
equipment does not resolve the
error, contact the system
administrator or maintenance
personnel.
Hardware monitoring of the
RAS software has been
terminated. If restarting the
equipment does not resolve the
error, contact the system
administrator or maintenance
personnel.
Action
Advertisement
Table of Contents
