Table of Contents
Advertisement
5. CHECKUP AND MAINTENANCE
(2) Installing main memory
The orientation of a main memory module on a connector is fixed. When you
install a main memory module, make sure the orientation is correct. Otherwise,
failure of the equipment may result.
Do not install main memory modules with different capacities on slot A and slot
B. If you do, the modules may not be recognized.
(a) Removing the cover of the equipment
Follow the instructions in "5.3.2 Installing and removing the cover of the
equipment (1) Removing the cover of the equipment" to remove the cover of the
equipment.
(b) Installing main memory
Insert the main memory module into the connector from right above the connector.
When the module is fully inserted, you will hear a click.
(c) Installing the cover of the equipment
Follow the instructions in "5.3.2 Installing and removing the cover of the
equipment (2) Installing the cover of the equipment" to install the cover of the
equipment.
Slot A
Slot B
Figure 5-5 Installing Main Memory
NOTICE
Side View
Top View
5-14
Advertisement
Table of Contents
