Table of Contents
Advertisement
6 Operation
6.3 Performing a scan
Step
2
3
4
5
6
7
8
118
Action
Select a saved method from the Method dropdown list in the Scan settings
pane,
or
adjust the scan settings to create a new method.
For more information about the scan settings, refer to
page
60.
If necessary, adjust the Laser & Filter combination settings in the General
settings dialog.
For more information about the laser and filter combination settings, refer
to
Section 4.3 General settings, on page
Tip:
For light-emitting samples, for example chemiluminescence, the Dark Scan
combinations (no laser and no filter) can be used.
Select the area or areas to be scanned in the Stage/Area pane.
For more information about how to select the scan area, refer to
the scan area, on page
Define the image file settings:
Select the directory where the image file should be saved in the Image
•
folder field.
Type a name for the image file in the File name field.
•
Select the image file format. For more information on image file formats,
•
refer to
Section 4.5 Image file settings, on page
Click Pre-scan.
Result: The sample is scanned at low resolution, and the image is displayed
in the View Image window.
Adjust the display parameters if desired, see
on page
78.
Click Back to return to the main screen,
•
or
Click Scan to start a scan,
•
or
Adjust the PMT voltage, and click Scan to start a scan.
•
69.
72.
Amersham Typhoon Operating Instructions 29193226 AC
Scan settings, on
Defining
76.
Section 4.6 View Image mode,
Hide quick links:
Advertisement
Table of Contents
