Table of Contents
Advertisement
6.3
Performing a scan
Introduction
This section describes how to perform an optional pre-scan, and a scan.
Precautions
Pre-scan the sample (optional)
Note:
Step
1
Amersham Typhoon Operating Instructions 29193226 AC
WARNING
When opening or closing the main scanner door, make sure that
no objects or body parts are caught in the main scanner door.
CAUTION
Do not open the main scanner door or filter door while the device
is in operation. Injury could result.
CAUTION
Do not leave samples in the instrument after scanning. If left, these
may degrade and cause damage to the instrument.
NOTICE
Avoid any shock or vibration to the instrument during scanning, or
some streaks appear in the image.
The pre-scan feature is not available in the phosphor imaging mode.
Action
In the main window of the Amersham Typhoon Control Software, click on
one of the scanning mode tabs to choose the scanning mode. See also
Scanning mode tabs, on page
60.
6 Operation
6.3 Performing a scan
117
Hide quick links:
Advertisement
Table of Contents
