Table of Contents
Advertisement
<Start_1>
<Spot selection>
<Weld/No weld external>
<Reset fault>
<Fault reset with WC>
<Fault reset with reweld>
<Proportional valve selection>
<Weld complete contact WC>
(Start/duration programmable before end of HOLD)
[Pre-squeeze time]
[Squeeze time]
[1st Weld time]
[1st Cool time]
[2nd Weld time]
[3rd Cool time]
[3rd Weld time]
[Hold time]
Figure 28: Example of no weld schedule, single spot
*1 The time between the squeeze time and the hold time corresponds to the total time of 1st weld time, 1st cool
time, 2nd weld time, 3rd cool time and 3rd weld time. The schedule is performed without welding current.
*1
É É
Advertisement
Table of Contents
