Table of Contents
Advertisement
Electrical connection
7-22
Current
Example:
Counter starting section
%
Counter stepper section
Count (wear) factor
Prewarning
*1
number of tipdressing events
Example: [sequence] without <Acknowledge Tip change> and w/o stop at <end of stepper>
Figure 17: Example of electrode replacement
NOTE
The desired weld timer response (stop or continued program execution) when the max.
number of welds (end of stepper) is reached must be programmed in Global Stepper
Setup under Basic Setup.
NOTE
You may also program the BOS-5000 software so as to send an acknowledgement that
the electrodes have been replaced.
PSI 6XXX.350 L1
2.0
10.0
1.0
*1
1.0
*1
*1 Stepper Curve
tipdressing curve
Counts (wear)
9.0
<End of Stepper>
10.0
Prewarning
Stop at
<End of Stepper>
<Acknowledge Tip
change>
Counts (wear)
9.0
10.0
Prewarning
<Acknowledge Tip change>
<End of Stepper>
no stop of program execution
1070 080 067-101 (2001.03) GB
Advertisement
Table of Contents
