Table of Contents
Advertisement
5288 V3 Server
User Guide
Table 3-3
Table 3-3 Cable connection checklist
Item
Power cable
Network cable
Ground cable
3.6 Removing the Server
3.6.1 Removing the Server and L-Shaped Guide Rails
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see
Step 2 Power off the server. For details, see
Step 3 Disconnect all power cables and signal cables from the server.
Step 4 Remove the server.
1.
Issue 26 (2018-11-19)
lists the cable connection checklist.
Description
The power cable is connected correctly to the rear of the chassis.
Network cables are connected correctly to the management Ethernet
ports or service Ethernet ports on the rear panel of the chassis.
The 5288 V3 server does not provide a separate ground port. It is
grounded through the ground cable of a power cable. Ensure that the
power cables of the PSUs are in good contact.
NOTE
Remove power cables first to prevent damage or injury caused by static electricity.
Loosen the captive screws on the 5288 V3 panel using a screwdriver. See step (1) in
Figure 1 Removing a
Figure 3-31 Removing the server
Copyright © Huawei Technologies Co., Ltd.
4 Powering On and Off the
serverFigure
3-31.
3 Installing and Removing the 5288 V3
1 Safety
Instructions.
Server.
81
- Quick Links:
- Physical Structure
Hide quick links:
Advertisement
Table of Contents
