Table of Contents
Advertisement
5288 V3 Server
User Guide
Figure 7-77 Installing a heat sink
Step 14 Use a Phillips screwdriver to tighten one pair of diagonally opposite screws on the heat sink
halfway and then tighten the other pair of screws. See step (2) in
Step 15 Install the air duct. For details, see
Step 16 Install the chassis cover. For details, see
Step 17 Install the 5288 V3. For details, see
Step 18 Connect all internal cables such as power and network cables. For details, see
External
Step 19 Power on the 5288 V3. For details, see
----End
7.39 Removing a DIMM
Remove a DIMM before replacing it with a new one.
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Determine the rack number and chassis number of the server to be removed, and label its
panel to prevent misoperations.
Step 3 Power off the 5288 V3. For details, see
Step 4 Remove all external cables such as power and network cables.
Issue 26 (2018-11-19)
Cables.
Copyright © Huawei Technologies Co., Ltd.
7.14 Installing the Air
7.12 Installing the Chassis
3.4 Installing the
Server.
4.1 Powering On the
1 Safety
Instructions.
4.2 Powering Off the
7 Replacing Parts
Figure
7-77.
Duct.
Cover.
3.5 Connecting
Server.
Server.
192
- Quick Links:
- Physical Structure
Hide quick links:
Advertisement
Table of Contents
