ISSUE 1.0
No.
Connectors
J1
Back Plane Board
J2 (EXP)
Expansion Connector
1.7.3.3 Installing the EXIFE-C1 Board
Not all boards are hot swappable. Do not remove or install from the chassis
when powering up.
Do Not Power on until all installations have been completed.
1.
Turn off the system power.
2.
Insert the EXIFE-C1 board in the guide rail of Expansion Chassis and push it securely into
position and tighten the two screws of EXIFE board.
Hardware Manual
Table 2-8 Connectors of EXIFE-C1
Connector on the Back Plane Board
J1 (EXP1) or J2 (EXP2) connector on the EXIFB-C1 board of the Main Chas-
sis
Guide rail
Figure 2-22 Insert the EXIFE-C1 Board
Connectable Devices
EXIFE-C1
SL2100
Screws
2-17