SL2100
6.
Connect the VOIPDB-C1 to a Switching hub using a LAN Cable.
7.
Refer to the SL2100 Programming Manual for detailed programming instructions.
The VoIP feature requires system configuration.
4.1.4 LED Indication
LED indications for the IP7WW-VOIPDB-C1 are listed
page
2-64. Each LED is listed with its associated function and operational status.
LED
ACT
Link activity or data transmission and re-
ception.
LINK1000
1000Base-T link speed indicator
LINK100
100Base-TX link speed indicator.
2-64
Figure 2-82 Connecting a LAN Cable
ACT
LINK1000
LINK100
ST
VOIPDB-C1 board
Figure 2-83 Location of LEDs
Table 2-27 VOIPDB LED Indications
Function
< Side View >
to HUB
LAN Cable
Table 2-27 VOIPDB LED Indications on
< Side View >
LED Status
On Green
LED lights when link up is completed. LED flash
when data is transmitting or receiving.
On Yellow
Lights up when 1000Base-T link up.
On Red
Lights up when 100Base-TX link up.
ISSUE 1.0
VOIPDB-C1 board
(J6)
Operation status
Installation