ISSUE 1.0
2.
Install three screws into the wall. The screw heads must stand off from the wall about 2.5 mm
(0.098") to 3.5 mm (0.138").
353.25 mm
(13.907")
• The screw diameter is 4 mm (0.158") to 4.5 mm (0.177").
• Wall-Mounting Screws (M4.1x 25: 4 pcs) are attached to the Chassis.
The other screw is installed after slide the chassis into the position.
3.
Align the three holes on the back of the Chassis with the three screws installed in the wall.
Hardware Manual
210 mm (8.268")
266.5 mm
(10.492")
195.9 mm
(7.713")
Figure 2-10 Screw Positions
Screw head
Screw head
Figure 2-11 Mounting the Chassis
2.5 mm (0.098") -
3.5 mm (0.138")
Hook
SL2100
2-9