Table of Contents
Advertisement
Notes
•
specifies the amount of volume of each <outStep>. The range of each
<outCalibrate>
is up to 65535, but will be suppressed to 32767. A value above <outCalibrate>= 65535 will cause
brate>
an error.
•
The range of
<sideTone>
65535 will cause an error.
•
Any change to
<outStep>
then select another mode with AT^SNFS, the same step will be applied. Nevertheless, the sound quality and
the amount of volume are not necessarily the same, since all remaining audio parameters can use different
values in either mode.
•
Audio mode 1 is fixed to <outStep>=4. In this mode, any attempt to change
returns an error.
•
The value of
<outStep>
AT+CFUN=x,1. Any other parameters changed with
restart. See also
AT^SNFD
•
The values of
<outStep>
•
CAUTION! When you adjust audio parameters avoid exceeding the maximum allowed level. Bear in mind that
exposure to excessive levels of noise can cause physical damage to users!
MC55_ATC_V04.00
Confidential / Released
is up to 65535, but will be suppressed to 32767. A value above <sideTone>=
takes effect in audio modes 2 to 6. That is, when you change
is stored non-volatile when the ME is powered down with
for details on restoring factory defaults.
can also be changed with
Page 416 of 475
<outStep>
need to be saved with
AT^SNFO
and AT+CLVL.
AT^SNFV
<outCali-
and
<outStep>
or other parameters
or reset with
AT^SMSO
for use after
AT^SNFW
3/17/06
Advertisement
Table of Contents
