■Executing Mode 7
1.
Set the RESET/STOP/RUN switch to the RUN position.
2.
Set the MODE/SELECT switch to the SELECT position.
Every time the switch is set to the SELECT position, the lighting status on the dot matrix LED switches.
Step.1
Step.2
Step.3
Step.4
Step.5
Step.6
Step.7
: ON
: OFF
3.
Turn the power OFF.
Step.7
Step.8
Step.9
Step.10
Step.11
Step.12
Step.1
6 PROCEDURE BEFORE OPERATION
6.2 Performing Hardware Diagnostics
6
37