Table of Contents
Advertisement
Scan Test
Provides the technician with detailed test steps.
Diagram
Provides a circuit diagram related to the selected DTC.
Waveform
Presents reference waveform information to help the
technician understand and fix the problem.
TSB Reference
Provides the technician with TSBs associated with the
selected DTC.
Connector
Presents information related to the connector to help
the technician understand and fix the problem.
Identifix® Direct-Hit®
A subscription is required to access Identifix® Direct
Hit®. To obtain a username and password, go to www.
identifix.com and fill out the necessary steps to acquire
an account.
Once account is setup with Identifix®:
•
Select Settings button from the screen.
•
Select Direct-Hit® from the available tabs on the
left margin of the screen.
•
Input the username and password acquired from
Identifix® by selecting the empty field.
•
Using the virtual keyboard enter the required infor-
mation for both fields.
•
Select GO.
•
Follow the prompts on the screen.
Read DTCs Button Definitions
Self Diag
Ford/Lincoln/Mercury
Self Diagnostics button displays a pop up menu allow-
ing the user to choose between specific special tests.
Refresh DTCs Button
Tapping the Refresh button initiates a fresh scan of
DTCs from the vehicle.
Share Button
Tapping the Share button opens the app and initiates
options. Depending on what's available at the time.
Share a list containing all the DTCs set by email or
Bluetooth or USB.
Bosch Automotive Service Solutions Inc
Refresh
Share
Read DTCs Button Definitions
Clear DTCs
Clear DTCs Button
The Clear DTCs button is used to clear codes and re-
move all but permanent DTCs on the selected control-
ler. To clear codes, complete the following:
NOTE:
•
Clearing DTCs will erase current Mode 1 Readi-
ness monitor information and require the user
go through necessary drive cycles over again.
So, if Mode 1 information needs to be reviewed,
be sure to view it before clearing codes.
•
If a code will not clear, turn the ignition off for
at least 10 seconds; turn it back on to KOEO,
then retry. Some controllers will go to sleep
after a period of inactivity and prevent clearing
DTCs. This key cycle may be needed when
attempting to communicate with other control-
lers after a period of time on a different control-
ler.
Other Button
Tapping the Other button displays a pop-up link that
takes the user to help content related to reading
DTCs.
Note: an active internet connection will be required.
Help
Selecting Help will open an online user manual.
Screen Capture
Screen Capture
Selecting Screen Capture will save a copy of the cur-
rent open screen.
Save
Tapping the Save button will save DTC and test data
reports from Automated System test
ADS 325 | User Manual | 33 | en
Other
Help
Save
582819 | REV. A | 07.2018
- Quick Links:
- Printer Setup
Hide quick links:
Advertisement
Table of Contents
