Table of Contents
Advertisement
Data Stream Button Definitions
Clear All Data
Select Clear Data to clear displayed
data stream. This function will reset the
timeline frame counter and clear graphed
data.
Use Metric Units
Use Metric Units
Selecting Metric Units will switch from English/Stan-
dard Units to Metric Units.
Use English/Standard Units
Use English/Standard Units
Selecting English/Standard Units will switch from
Metric Units to English/Standard Units.
Freeze Frame
Mode 2 views data captured when a fault occurred.
Freeze frame shows a data stream snapshot that was
automatically recorded by the ECU when one or more
DTCs occurred.
ss03111
Connected
Generic OBDII
Mode 2 Freeze Frames
Readiness Mode 1
Freeze Frame Description
Data Stream Mode 1
Diesel Particulate Filter Bank 1 Delta Pressure
Freeze Frame Mode 2
Diesel Particulate Filter Bank 2 Delta Pressure
DTCs Modes 3, 4, 7, A
Diesel Particulate Filter Bank 1 Inlet Pressure
02 Sensors Mode 5
Diesel Particulate Filter Bank 2 Inlet Pressure
Freeze frame records each sensor's current information
at the time a DTC sets. This feature could be used when
diagnosing an intermittent condition that requires cer-
tain conditions are met before the fault is active.
NOTE: DTCs are not always stored in Mode 2 freeze frame.
Freeze Frame Button Definitions
Other Button
Tapping the Other button displays a pop-up link that
takes the user to more buttons.
Help
Selecting Help will open an online user manual.
Bosch Automotive Service Solutions Inc
May 31, 2018
?
Use Metric Units
Share
Help
Value
-25.2 psi
-9.5 psi
-93.8 psi
-80.8 psi
Other
Help
Freeze Frame Button Definitions
Use Metric Units
Selecting Metric Units will switch from English/Stan-
dard Units to Metric Units.
Use English/Standard Units
Use English/Standard Units
Selecting English/Standard Units will switch from
Metric Units to English/Standard Units.
Screen Capture
Selecting Screen Capture will save a copy of the cur-
rent open screen.
DTCs Modes
Modes 3, 4, 7, and A read and clear DTCs.
ss03112
Connected
10:58
Generic OBDII
Readiness Mode 1
Data Stream Mode 1
Freeze Frame Mode 2
TAP 'DTCs MODES 3, 4, 7, A' TO REOPEN
DTCs Modes 3, 4, 7, A
02 Sensors Mode 5
1. Select DTCs Modes from the Generic OBDII screen.
ss03113
Connected
DTCs
for Global OBDII
OBDII CURRENT CODES
B0001
Driver Frontal Stage 1
Deployment Control (Subfault)
B0002
Driver Frontal Stage 2
Deployment Control (Subfault)
B0003
Driver Frontal Stage 3
Deployment Control (Subfault)
OBDII PENDING CODES
B0001
Driver Frontal Stage 1
2. Use the buttons and follow the prompts on the
screen.
ADS 325 | User Manual | 21 | en
Use Metric Units
Screen Capture
Use Metric Units
Clear DTCs
Refresh
582819 | REV. A | 07.2018
10:59
May 31, 2018
?
Help
10:59
May 31, 2018
Share
Save
- Quick Links:
- Printer Setup
Hide quick links:
Advertisement
Table of Contents
