Panasonic Eco Solutions Nordic AB
MEW01457
27
27.1
Action
"Access"
Scroll to menu H4.
"A"
"A"
or
"1"
"Return"
or
"A"
Rev: -
Operating Instructions Fire alarm system EBL512, V2.7.x
Present system status on display
and printer (H4)
A printer is factory mounted in control unit 1549. Printer 1558 is an
option for control unit 1548.
Disablement (H4/U1)
A list of all disablements in the system. Also alarm point(s) and/or
zones disabled via the function "Single encapsulated reset" (see page
52) is shown in the list. In this case a zone will be displayed as ZZZ-
00 (i.e. zone number and address 00).
Disablements by time channels are listed in menu H4/U2.
From this menu, it is also possible to get a print-out.
Text in display
Present system status on display and
printer
Disablement
Printout: (1=yes)
When "A" is pressed, the disablements will be shown in the
display. Some examples:
Zone XXX address XX disabled
or
Zone XXX is disabled
or
Alarm points are disabled by
time channel in CU XX
Printing started. To stop printing press
C and 0 simultaneously
Disablement
Printout: (1=yes)
ACCEPT? H4
ACCEPT?
110
Comments
According to chapter
"Access", see page 92.
Press "1" for an automatic
U1
print-out of all
disablements in the
system.
Press "A" for presentation
in the display.
L = a list in which you can
scroll. If there are no
disablements and if
"Return" is pressed, menu
L
U1 will be shown again.
a)
On this row can be
shown adding infor-
L
mation, e.g.: Automatic
re-enablement HH:MM
or (by open door in CU
xx)
Press "A" and menu U1
will be shown again.
Scroll or press "Return" to
U1
menu H4. Scroll or press
"Return" to log off.