The protocol-independent multicast sparse-mode (PIM-SM) commands in this section are supported in the
Dell Networking operating system.
IPv4 PIM-Sparse Mode Commands
The following describes the IPv4 PIM-sparse mode (PIM-SM) commands.
clear ip pim rp-mapping
The bootstrap router (BSR) feature uses this command to remove all or particular rendezvous point (RP)
advertisement.
C9000 Series
Syntax
clear ip pim rp-mapping [rp-address]
Parameters
rp-address
Command Modes
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.5(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
PIM-Sparse Mode (PIM-SM)
(OPTIONAL) Enter the RP address in dotted decimal format
(A.B.C.D).
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
PIM-Sparse Mode (PIM-SM)
42
1670