Ospfv2 Commands; Area Default-Cost - Dell C9000 Series Reference Manual

Networking command-line reference guide

Hide thumbs Also See for C9000 Series:

Table of Contents

OSPFv2 Commands

The Dell Networking implementation of OSPFv2 is based on IETF RFC 2328. .

Set the metric for the summary default route the area border router (ABR) generates into the stub area. Use

this command on the border routers at the edge of a stub area.

C9000 Series

area area-id default-cost cost

To return default values, use the no area area-id default-cost command.

cost = 1; no areas are configured.

Command Modes

Command History

This guide is platform-specific. For command information about other platforms, refer

to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Specify the OSPF area in dotted decimal format (A.B.C.D.) or

enter a number from zero (0) to 65535.

Specifies the stub area's advertised external route metric. The

range is from zero (0) to 65535.

Introduced on the C9010.

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Added support for the Multi-Process OSPF.

Introduced on the S-Series.

Introduced on the C-Series.

Introduced on the E-Series.

Open Shortest Path First (OSPFv2 and OSPFv3)

Table of Contents