16
Installation
HD Camera Connection
Connects the HD camera to the camera jack of the codec unit with the supplied camera connection cable(RJ-45[with power] to D-sub Cable)
as shown in the following illustrations.
HD Camera Connection
3
NOTE
•
After connection is completed, adjust the angle of the camera to suit your view.
•
Do not Connect HDMI Out Cable to Camera HDMI Input Port.
•
It is recommended to use the camera with the 1280 x 720p60 mode.
•
Do not connect Camera Connection Cable (RJ-45[with power] to D-Sub Cable) to other device's LAN Jack. (e.g. Note book LAN Jack)
•
After connecing the Camera Connection Cable properly, turn on the Codec Box. Otherwise the VCS may cause malfunction.
•
Do not hold the camera forced for a long time. Install the camera in a place with sufficient not to interrupt the rotation. This may cause
product to breakdown or power may turn OFF automatically.
Optional
DC 12 V
V5000,V5500
Optional
DC 12 V
VR5010H