Table of Contents
Advertisement
Programming Manual for Digital Key Telephone System
300 & LDK-100
2. Press the programmed key for {CFU
Activate with Destination} Or, Press
[FLASH] key +[2]+[2].
3. Service accepted by PX and the LCD
will display as during off-hook state. Or,
when service is rejected by PX then the
LCD will display as during off-hook state
4. When the station goes to on-hook state,
feature key LED and {CO} key LED
Flash at 30 IPM. But in rejected case
normal LCD will be displayed and
feature key LED goes idle.
To deactivate Call Forward Unconditional
1. Press {CO}] key.
2. Press the programmed key for {CFU
Activate with Destination} Or, Press
[FLASH] key +[2]+[3].
3. Service accepted by PX and the LCD
will display as during off-hook state.
( {CO} key and feature key LED goes
idle). Or, when service is rejected by PX
then the LCD will display as during off-
hook state.
When the station goes to on-hook state,
4.
feature key LED and {CO} Key LED
goes idle. But in rejected case normal
LCD will be displayed and feature key
LED doesn't change.
Condition
1. This feature is only available in national
keypad protocol.
2. This feature can only activated by using
preprogrammed flexible button.
3. If the CFU feature is activated {CFU
Activate with Destination} key LED will
flash at 30 IPM.
4. This feature is supported only access
basis. So, only ATD station can activate
this feature. If normal station tries to use
this feature, then error tone is heard.
5. If this feature is activated incoming co
calls are unconditionally transferred to the
predefined destination.
ISDN – Memo Tel (Italy national
protocol)
Description
Memo-Tel
is
incoming co call to the MSG Storage system
of the PX when co line is busy or when there
is no answer. This feature can be activated
selectively activated in normal case(busy or
no answer) or only in no answer case. And
also the user can check the messages left in
the PX.
.
Operation
To activate Memo-Tel
1. Press the {CO} key.(Attendant only.)
2. Press the programmed key for {MEMO-TEL
Activation_Normal}, or [FLASH] key + [2] +
[5] for Normal activation.
3. Service accepted by PX and display during
off-hook state. Or service rejected by PX
and display during off-hook state.
4. When the station goes to on-hook state
normal LCD will be displayed.
To change Memo-Tel TIMER
1. Press the {CO} key.(Attendant only.)
2. Press the programmed key for {MEMO-TEL
Timer_Codel},or [FLASH] key + [2] + [6]
change timer.
3. Service accepted by PX and display during
off-hook state. Or service rejected by PX and
display during off-hook state.
4. When the station goes to on-hook state
normal LCD will be displayed.
To deactivate Memo-Tel
1. Press the {CO} key.(Attendant only.)
2. Press the programmed key for {MEMO-
TEL Deactivation}, or [FLASH] key + [2]
+ [4] for Normal activation.
3. Service accepted by PX and display
during off-hook state. Or service rejected
by PX and display during off-hook state.
Enquiry of service status
Press the {CO} key.(Attendant only.)
1.
1-15
CO Line Features
a
feature
transferring
LDK-
the
Advertisement
Table of Contents
