Netmap - Siemens SIMATIC NET SCALANCE S615 Configuration Manual
Industrial ethernet security
web based management
Hide thumbs
Also See for SIMATIC NET SCALANCE S615:
- Operating instructions manual (68 pages) ,
- Configuration manual (320 pages)
Table of Contents
Advertisement
4.7.3.4
NETMAP
On this WBM page, you specify the rules for NETMAP. NETMAP is static 1:1 mapping of
network addresses in which the host part is retained.
Note
Firewall rules with source NAT
The source NAT rule is applied after routing and the firewall decision. With the firewall rule,
the input from "Source IP Subnet" is used.
Firewall rules with destination NAT
Destination NAT takes place prior to routing and the implementation of the firewall rule. With
the firewall rule, the input from "Translated Destination IP Subnet" is used.
Description
● "Type" drop-down list
Specify the type of address translation.
– Source: Replacement of the source IP address
– Destination: Replacement of the destination IP address
● "Source Interface" drop-down list
Specify the source interface.
– VLANx: VLAN with configured subnet
– SINEMA RC: Connection to SINEMA RC Server
– IPSecVPN: Either all IPsecVPN connections (all) or a specific IPsecVPN connection
● "Destination Interface" drop-down list
Specify the destination interface.
– VLANx: VLAN with configured subnet
– SINEMA RC: Connection to SINEMA RC Server
– IPSecVPN: Either all IPsecVPN connections (all) or a specific IPsecVPN connection
SCALANCE S615 Web Based Management
Configuration Manual, 05/2015, C79000-G8976-C388-02
Configuring with Web Based Management
4.7 "Layer 3" menu
143
Hide quick links:
Advertisement
Table of Contents
