Description
Table 1 has the following columns:
● 1st column
Shows that the settings are valid for all ports.
● Setting
Select the setting from the drop-down list. If "No Change" is selected, the entry in table 2
remains unchanged.
● Copy to Table
If you click the button, the setting is adopted for all ports of table 2.
Table 2 has the following columns:
● Port
Shows the port.
● Setting
Specify the LLDP functionality. The following options are available:
– Tx
– Rx
– Rx & Tx
– "-" (Disabled)
Procedure
1. Select the required LLDP functionality from the drop-down list.
2. Click the "Set Values" button.
SCALANCE S615 Web Based Management
Configuration Manual, 05/2015, C79000-G8976-C388-02
This port can only send LLDP frames.
This port can only receive LLDP frames.
This port can receive and send LLDP frames.
This port can neither receive nor send LLDP frames.
Configuring with Web Based Management
4.6 "Layer 2" menu
133