Value Of The Output Object For Logic True; Output Default Value True - ABB i-bus KNX Product Manual
Room temperature controller
Hide thumbs
Also See for i-bus KNX:
- Product manual (264 pages) ,
- Product manual (5 pages) ,
- Product manual (152 pages)
Table of Contents
Advertisement
11.6.4.9
Value of the output object for logic true
Options:
Output is set on 1:
■
–
As soon as the logic function is fulfilled, a logical "1" is present on the output. This
equally applies when the "Object type output" parameter is set on "1byte".
Defined via output default value true:
■
–
The value that is present on the output when the logic has been met, can be set via
parameter "Output default value true".
The parameter is used to specify the value of the output object in the logic status "True".
11.6.4.10
Output default value true
Options:
True = 0:
■
–
When a logic has been met, value "0" is present at communication object "GFx: output".
True = 1:
■
–
When a logic has been met, value "1" is present at communication object "GFx: output".
The parameter is used to specify the value that is sent via the 1-bit communication object "GFx:
output" when a condition (true) has been met.
Note
The parameter can only be set if the "Object type output" parameter is set on "1
bit" and parameter "Value of the output object for logic true" is set on "Defined
via output default value true".
11.6.4.11
Output default value true
Options:
The parameter is used to set the value that is sent via the 1-byte communication object "GFx:
output" when a condition (true) has been met.
Note
The parameter can only be set if the "Object type output" parameter is set on "1
byte" and parameter "Value of the output object for logic true" is set on "Defined
via output default value true".
Product manual 2CKA001473B9482
Description of application and parameters
Output is set to 1
Defined via output default value true
True = 0
True = 1
Setting option from 0 to 255
Application "General functions"
│151
Advertisement
Table of Contents
