Deleting A Zero Offset - Siemens SINUMERIK 840D sl Operating Manual

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

These value changes are available in the part program immediately or after "Reset".

Deleting a zero offset

You have the option of deleting zero offsets. This resets the entered values.

Operating Manual, 03/2013, 6FC5398-8CP40-3BA1

Press the "Clear offset" softkey to reset all entered values.

Press the "ZO +" or "ZO -" softkey to select the next or previous offset,

respectively, within the selected area ("Active", "Base", "G54 to G599")

without first having to switch to the overview window.

If you have reached the end of the range (e.g. G599), you will switch

automatically to the beginning of the range (e.g. G54).

Machine manufacturer

Please refer to the machine manufacturer's specifications.

Press the "Back" softkey to close the window.

Select the "Parameter" operating area.

Press the "Zero offset" softkey.

Press the "Active", "Base" or "G54...G599" softkey.

Setting up the machine

2.7 Zero offsets

Sinumerik 828d turning