Arbitrary Positions (Cycle802); Function - Siemens SINUMERIK 840D sl Operating Manual

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Programming technology functions (cycles)

8.1 Drilling

Tool traverse path

Arbitrary positions (CYCLE802)

The "Arbitrary positions" cycle allows you to program positions freely, i.e. rectangular or

polar. Individual positions are approached in the order in which you program them. Press

softkey "Delete all" to delete all positions programmed in X/Y.

The programmed positions are machined with the previously programmed tool (e.g.

center drill). Machining of the positions always starts at the reference point. In the case of

a grid, machining is performed first in the direction of the 1st axis and then meandering

back and forth. The frame and hole circle are machined counterclockwise.

For G code, for lines/frames/grids, a start is always made at the next corner of the frame

or grid or the end of the row. The frame and hole circle are machined counterclockwise.

The part program or ShopTurn program to be processed has been

created and you are in the editor.

Press the "Drilling" softkey.

Press the "Positions" and "Arbitrary positions" softkeys.

The "Positions" input window opens.

Operating Manual, 03/2013, 6FC5398-8CP40-3BA1

Sinumerik 828d turning