Siemens SINUMERIK 840D sl Operating Manual page 314

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Programming technology functions (cycles)

8.1 Drilling

Display or hide all positions at once

Press the "Hide position" softkey.

The "Hide position" window opens on top of the input form of the

position pattern.

The positions are displayed in a table.

The numbers of the positions, their coordinates (X, Y) as well as a

checkbox with the state (activated = on / deactivated = off) are

The actual position in the graphic is highlighted in color.

Using the mouse, select the required position and deactivate or activate

the checkbox in order to hide the position or display it again.

In the diagram, skipped positions are shown in the form of a circle and

displayed (active) positions are shown in the form of a cross.

Note: You have the option of selecting individual positions using the

<Cursor up> or <Cursor down> keys – and hiding and displaying using

the <SELECT> key.

Press the "Hide all" softkey to hide all positions.

Press the "Show all" softkey to display all positions again.

Operating Manual, 03/2013, 6FC5398-8CP40-3BA1

Sinumerik 828d turning