Reset Igmp-Snooping Group; Reset Igmp-Snooping Statistics - HP 3600 v2 Series Command Reference Manual
Ip multicast
Hide thumbs
Also See for 3600 v2 Series:
- Command reference manual (510 pages) ,
- Configuration manual (449 pages) ,
- Security configuration manual (398 pages)
Table of Contents
Advertisement
reset igmp-snooping group
Syntax
reset igmp-snooping group { group-address | all } [ vlan vlan-id ]
View
User view
Default level
2: System level
Parameters
group-address: Specifies an IGMP snooping group. The value range of group-address is 224.0.1.0 to
239.255.255.255.
all: Specifies all IGMP snooping groups.
vlan vlan-id: Specifies a VLAN. The value range of vlan-id is 1 to 4094.
Description
Use reset igmp-snooping group to remove the dynamic group entries of the specified IGMP snooping
groups.
This command takes effect only in IGMP snooping-enabled VLANs.
This command cannot remove the static group entries of IGMP snooping groups.
Examples
# Remove the dynamic group entries of all IGMP snooping groups.
<Sysname> reset igmp-snooping group all
reset igmp-snooping statistics
Syntax
reset igmp-snooping statistics
View
User view
Default level
2: System level
Parameters
None
Description
Use reset igmp-snooping statistics to clear statistics for the IGMP messages learned by IGMP snooping.
Examples
# Clear statistics for the IGMP messages learned by IGMP snooping.
<Sysname> reset igmp-snooping statistics
36
Advertisement
Table of Contents
