Igmp - HP 3600 v2 Series Command Reference Manual
Ip multicast
Hide thumbs
Also See for 3600 v2 Series:
- Command reference manual (510 pages) ,
- Configuration manual (449 pages) ,
- Security configuration manual (398 pages)
Table of Contents
Advertisement
Parameters
None
Description
Use host-tracking to enable the IGMP host tracking function globally.
Use undo host-tracking to disable the IGMP host tracking function globally.
By default, this function is disabled.
Related command: igmp host-tracking.
Examples
# Enable the IGMP host tracking function globally on the public network.
<Sysname> system-view
[Sysname] igmp
[Sysname-igmp] host-tracking
# Enable the IGMP host tracking function globally in VPN instance mvpn.
<Sysname> system-view
[Sysname] igmp vpn-instance mvpn
[Sysname-igmp-mvpn] host-tracking
igmp
Syntax
igmp [ vpn-instance vpn-instance-name ]
undo igmp [ vpn-instance vpn-instance-name ]
View
System view
Default level
2: System level
Parameters
vpn-instance vpn-instance-name: Specifies a VPN, where vpn-instance-name is a case-sensitive string of
1 to 31 characters. If this option is not specified, the command applies to the public network.
Description
Use igmp to enter public network IGMP view or VPN instance IGMP view.
Use undo igmp to remove configurations in public network IGMP view or VPN instance IGMP view.
IP multicast routing must be enabled in the corresponding VPN instance before this command can take
effect.
Related commands: igmp enable and multicast routing-enable.
Examples
# Enable IP multicast routing on the public network and enter public network IGMP view.
<Sysname> system-view
[Sysname] multicast routing-enable
[Sysname] igmp
88
Advertisement
Table of Contents
