Sony IPELA PCS-G50 Operating Instructions Manual page 64
Video communication system
Hide thumbs
Also See for IPELA PCS-G50:
- Technical documentation manual (20 pages) ,
- Manual (8 pages) ,
- Operating instructions manual (17 pages)
Table of Contents
Advertisement
SNMP Mode
Allows you to select whether the Simple
Network Management Protocol (SNMP)
agent is enabled.
On: Enables the SNMP agent.
Off: Disables the SNMP agent.
Trap Destination
Enter the address of the trap destination
SNMP manager.
Community
Enter the community name managed by the
SNMP manager. By default, this is "public"
and this setting does not normally need to be
changed.
Description
Enter the description of this terminal. By
default, this is "Videoconference Device"
and this description does not need to be
changed.
Location
Enter the location where this terminal is
installed.
Contact
Enter information bout the terminal
administrator.
PPPoE Page 1/2
LAN Setup
PPPoE
Page:
1/2
PPPoE
PPPoE User Name
PPPoE Password
PPPoE
Allows you to select whether to use PPPoE
for LAN connection. When using PPPoE,
you can use the B FLET'S* or FLET'S
ADSL service without connecting a router.
On: Uses PPPoE for LAN connection.
Off: Does not use PPPoE.
64
Registering Local Information
Off
Save
Cancel
Note
Operations of PPPoE for LAN connection are
presently verified only for the Japanese NTT B
FLET'S and FLET'S ADSL services.
* "FLET'S" is a trademark of NTT East and
NTT West Corporations in Japan.
PPPoE User Name
Enter a user name when you use PPPoE for
LAN connection.
PPPoE Password
Enter a password when you use PPPoE for
LAN connection.
PPPoE Page 2/2
LAN Setup
PPPoE
Page:
2/2
Fixed IP for PPPoE
Fixed IP Address for PPPoE
PPPoE DNS
Primary DNS
Secondary DNS
Fixed IP for PPPoE
Select whether to make a PPPoE connection
using a fixed IP address.
On: Uses a fixed IP address for a PPPoE
connection.
Off: Does not use a fixed IP address for a
PPPoE connection.
Fixed IP Address for PPPoE
Enter an IP address when "Fixed IP for
PPPoE" is set to "On".
PPPoE DNS
Allows you to select whether to obtain DNS
server addresses automatically or to specify
them manually when connecting to a LAN
using PPPoE.
Specify Allows you to specify DNS server
addresses.
Obtain automatically: Assigns DNS server
addresses automatically.
Off
.
.
.
Obtain automatically
.
.
.
.
.
.
Save
Cancel
Hide quick links:
Advertisement
Table of Contents
