Siemens HiPath 1100 Service Manual page 307
Phone systems
Hide thumbs
Also See for HiPath 1100:
- Service manual (389 pages) ,
- Programming manual (241 pages) ,
- User manual (137 pages)
Table of Contents
Advertisement
Relay:
The relay can be activated via the sensor, assuming that the sensor is configured. It can be
activated manually or automatically after a specified time. When the relay is activated, the
contacts close. When it is deactivated, the contacts open.
The name assigned to this position may have up to 15 characters.
Sensor Function Configuration (170)
Allows you to select a function for the sensor:
Deactivate the sensor's function (default)
●
Dial the number specified in "Number Dialed by Sensor Activation" (Code 052).
●
Activate the relay through the sensor
●
Detect DTMF code. When this setting is selected, the number that was called must
●
acknowledge or ignore an alarm call by sending an acknowledgement code ("#" DTMF
signal)
Sensor Activation Logic (174)
The main position of the sensor can be set as follows: contacts are closed and the sensor is
activated when the contacts are open; or contacts are open and the sensor is activated when
the contacts are closed.
Time between Attempts for Activating the Sensor (050)
This setting specifies a timeout after which a new attempt is made to call an internal or external
number, assuming that the line was busy on the previous attempt.
MSN Assignment for the Sensor (051)
This settings specifies an MSN for the system. This MSN will be used for outgoing calls. By
using this MSN the called party is able to identify the origin of the call. For instance, this would
be the case for an alarm.
Number Dialed by Sensor Activation (052)
This setting specifies the number to be automatically dialed when a specific sensor is activated.
The number to be dialed when the sensor is activated is stored in the System Speed Dial. When
the number stored in the System Speed Dial is changed, this field is updated. Similarly, when
the number in the field is changed, the change is reflected in the System Speed Dial.
A31003-K1160-S100-03-7620
Service Manual
Configuring the system specifically for the client
Comments about the System's Programming Codes
7-69
- Quick Links:
- Hipath 1100 Configurations
- Hipath 1120
- Hipath 1150
Hide quick links:
Advertisement
Table of Contents
