Siemens HiPath 1100 Service Manual page 305
Phone systems
Hide thumbs
Also See for HiPath 1100:
- Service manual (389 pages) ,
- Programming manual (241 pages) ,
- User manual (137 pages)
Table of Contents
Advertisement
Assigning MSNs to Attendants (192)
MSNs registered for each slot (see "MSN Extension Assignment for Outgoing External Calls
(086)") must be assigned to extensions. Day Service/Night Service Call Groups and Second
Attendants must be assigned to extensions. Call Groups or an EVM virtual port (see "Mailboxes
Assignments (203)") that will answer calls during specified time periods.
An extension. Group or EVM virtual port cannot be assigned more than once. A distinctive tone
on the handset indicates an invalid entry.
Busy Signaling (004)
This signals the caller that the line is busy, when the system receives an incoming call and the
attendant extension is busy.
This feature is valid only for digital lines with an attendant number. It is not valid if
more than one extension is configured for the slot/DID number/MSN. If the Fax/DID
module is installed and configured for digital lines, this feature will also be invalid.
Local Area Code Filter (011)
This allows the system to send the Area Code (LAC) to a destination exchange over a digital
line. This enables Caller ID.
Country Area Code Filter (012)
This allows the system to send the Country Code (CAC) to a destination exchange over a digital
line. This enables Caller ID.
Call Deflection (229)
When this feature is available and provided by a local carrier, an incoming call to an extension
enabled with Call Forwarding (*11) is routed directly to an external destination over the public
network. Alternatively, the HiPath 1100 system can be used.
ISDN Layer 1(101)
Allows you to change some default ISDN settings for specified countries.
ISDN Layer 2(102)
Allows you to change some default ISDN settings for specified countries.
B Channel (103)
Allows you to change some default ISDN settings for specified countries.
A31003-K1160-S100-03-7620
Service Manual
Configuring the system specifically for the client
Comments about the System's Programming Codes
7-67
- Quick Links:
- Hipath 1100 Configurations
- Hipath 1120
- Hipath 1150
Hide quick links:
Advertisement
Table of Contents
