Step
11.
"Performing a Visual Inspection" on page 4-59.
12.
Turn on the power supply.
13.
Configure the required data (see "Operation" on page 6-1).
Assembly Diagram
Figure 4-27
Installing a CTR- U
4.7.8
Installing a Music Module
4.7.8.1
On the HiPath 1120
Installation Procedures
Step
Procedure
1.
Turn off the power supply.
2.
Remove the system's cover
3.
Raise the system's top slot (MB).
4.
Insert the module in the slot shown on Figure 4-28.
5.
Attach the MB to the module.
A31003-K1160-S100-03-7620
Service Manual
Installation of Expansion and Option Modules
Procedure
Module on the HiPath 1190/1190R
P0/E
Installation
4-33