6
3) Remove the cushioning material (Styrofoam) and the pallet from the upper cover.
1
4) Slightly lift the front and rear casters, and remove the cushioning material (Styrofoam).
6
Installation > Unpacking > Unpacking Procedure
2
F-6-8
F-6-9
Installation > Unpacking > Unpacking Procedure
5) Take the finisher out of the bag and remove the tape used outside the finisher.
6) Remove the cushioning material (Styrofoam) of the upper tray and the lower tray.
7) Remove the fixing screw, and remove the metal fittings fixing.
• 2 screws
x2
6-7
F-6-10
F-6-11
6-7