11.10.1 Seismic vibration
Meets requirements of DIN/IEC 60068-3-3 Class III for strong
and strongest earthquakes.
11.10.2 Influence of mounting orientation
Not measurable.
11.10.3 Noise emissions
Max. 100 db (A)
Noise-reduced version max. 85 db (A)
11.10.4 Complies with the following directives
— EMC Directive 89/336/EEC as of May 1989
— EC Directive for CE conformity marking
Change from two to one column
12 Appendix
12.1 Additional documents
— Data sheet for PositionMaster EDP300 (DS/EDP300)
— Commissioning instruction for PositionMaster EDP300 (CI/EDP300)
— SIL safety manual for PositionMaster EDP300
12.2 Approvals and certifications
The version of the device as provided by us meets the requirements of the following EU directives:
— EMC Directive 2004/108/EC
Explosion
Designation relating to intended use in potentially explosive atmospheres in compliance with:
protection
— ATEX Directive
— IEC standards
— FM Approvals (US)
— CSA International (Canada)
IMPORTANT (NOTE)
All documentation, declarations of conformity, and certificates are available in ABB's download area.
www.abb.com/instrumentation
54 OI/EDP300-EN | PositionMaster EDP300
11.11 Environmental capabilities
Ambient temperature range
For operation, storage, and
transport
When using proximity
switches SJ2-S1N (NO)
Relative humidity
Operational with housing
closed and air supply
switched on
Transport and storage
-40 ... 85 °C (-40 ... 185 °F)
25 ... 85 °C (-13 ... 185 °F)
95 % (annual average), condensation
permissible
75 % (annual average)