Epson Artisan 810 Service Manual page 164

Color inkjet printer
Hide thumbs Also See for Artisan 810:
Table of Contents

Advertisement

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
3.
Turn the Combination Gear 12.1, 11.3 in the direction of the arrow, and move
the Scanner Carriage Unit to the center.
Take extra care not to contaminate the Scanner Timing Belt with
C A U T I O N
grease on the rail of the Lower Scanner Housing.
4.
Remove the Driven Pulley and Combination Gear12.1, 11.3 from the Scanner
Lower Housing, and remove the Scanner Timing Belt.
Scanner Carriage Unit
Driven Pulley
Scanner Timing Belt
Figure 4-120. Removing the Scanner Carriage Unit (2)
DISASSEMBLY/ASSEMBLY
Combination Gear12.1, 11.3
Disassembly Procedures
Be careful not to damage the Scanner Carriage FFC since they are
C A U T I O N
secured with double-sided tape (x2).
5.
Peel off the Scanner Carriage FFC from the Scanner Lower Housing, and
remove the Scanner Carriage Unit.
Scanner Carriage FFC
Figure 4-121. Removing the Scanner Carriage Unit (3)
When attaching the Scanner Cable Cover, route the FFCs and
grounding wire as shown below.
Artisan 810/835/837/PX810FW/
TX810FW/PX820FWD/
TX820FWD/PX830FWD
C
A
Scanner Carriage FFC
Scanner CR Encoder FFC,
B
Cover Open Sensor FFC
Figure 4-122. Attaching the Scanner Cable Cover
Revision G
Scanner Carriage Unit
Artisan 710/725/730/PX710W/
TX710W/PX720WD/TX720WD/
PX730WD/TX730WD
Rear
side
A
C
B
Grounding wire
C
Rib
Groove
Confidential
Rear
side
A
B
164

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents