10
Machine Data, NC Start-Up, System Parameters – Operating Area Start-Up
10.4 PLC
10.4
PLC
10.5
HMI startup
10-126
These functions are described in Section 9, Subsection "PLC".
Function
The following individual settings are available on the HMI:
• Language selection
• Action log
• DOS editor
Precondition
The HMI softkey in the Startup working window has been pressed.
The following working window is then displayed:
NC Startup Overview working window
Operating sequence
You can call the following functions with the corresponding softkey:
→ Language Selection working window (SK only
Lang. Selec.
appears if more than two languages are loaded)
→ Action Log working window
Action log
→ DOS Editor working window
DOS editor
SINUMERIK 840D/840Di/810D Operator's Guide Handheld Terminal 6 (BAH) - 03.04 Edition
10
03.04
Siemens AG, 2004. All rights reserved.