10
Machine Data, NC Start-Up, System Parameters – Operating Area Start-Up
10.3 NC startup
10.3
NC startup
10.3.1 NCK address
10-124
Function
The NC startup offers the following function:
• NCK address
Precondition
The NC softkey in the Startup Overview working window has been
pressed.
The following working window is then displayed:
NC Startup Overview working window
Operating sequence
Call up the desired function with the corresponding softkey.
NCK addr.
NCK Address working window
Function
With this function you can assign a new address to the NCK.
Precondition
• The NCK addr.softkey has been pressed in the NC Startup
Overview working window.
SINUMERIK 840D/840Di/810D Operator's Guide Handheld Terminal 6 (BAH) - 03.04 Edition
10
03.04
Siemens AG, 2004. All rights reserved.