[When IC tag reader is supported]
Hold the cartridge bottle over the RFID reader of the printer so that the IC tag
2
mark of the label on the bottle can be read.
● If the Ink ID is read by the IJ printer, steps
RFID Reader
● If there is still ink remaining in the Cartridge bottle, do not replace it even if
the Remaining Ink Icon indicates replacement. This could be due to
malfunction on the parts. Contact your nearest service station.
The part may be broken; contact your nearest service station.
● If there is no reaction when you hold the cartridge bottle over the reader of
the printer, the IC tag of the cartridge may be damaged.
In this case, an ink ID can be input manually from the IJP screen.
(Steps
2
-1 and
CAUTION
2
-2)
-1 and
-2 are not necessary.
2
2
IC tag mark
Sc an
he re
Within 30 mm
●Replenishing the ink 8-3